Man charged with assaulting British singer Leona Lewis

Friday, October 16, 2009

A man has been arrested and charged after the assault of British singer Leona Lewis, which occurred on Wednesday. The attacker turned out to be 29-year-old Peter Kowalczyk, who suffers from a health condition called anaemia, which causes a reduction from the normal number of red blood cells. The condition also causes a decrease in oxygen-binding ability. His parents said that it “affects his state of mind”. He had also been suffering from a series of psychological problems, of which he was getting music therapy for from the National Health Service (NHS).

It was thought that he attacked Leona Lewis out of envy because she had won the third series of The X Factor UK, whereas he was turned down from the show, according to British tabloid The Sun. On Wednesday, Leona was signing copies of her autobiography “Dreams” for attending fans in a Waterstone’s book specialist store in the Piccadilly region of London, England. Kowalczyk was believed to be waiting for five hours to get an autobiography signing. When he did attack Lewis, he was immediately wrestled to the ground by security guards at the scene, while Leona was escorted away. The attack left a large bruise on her head.

Peter has been arrested and charged with assault. He was placed into a psychiatric hospital and sectioned under the Mental Health Act 2007 on Thursday. As a result of this incident, Leona Lewis has cancelled a trip to Germany, where she would have signed more copies of her autobiography. The 24-year-old singer is now being cared for in her East London home by Jo and Maria, her parents, and is also being comforted by Lou Al-Chaama, her boyfriend. It has been reported that Kowalczyk is due to appear in a court in late October 2009.

Retrieved from “https://en.wikinews.org/w/index.php?title=Man_charged_with_assaulting_British_singer_Leona_Lewis&oldid=4627127”

Author Amy Scobee recounts abuse as Scientology executive

Monday, October 11, 2010

Wikinews interviewed author Amy Scobee about her book Scientology – Abuse at the Top, and asked her about her experiences working as an executive within the organization. Scobee joined the organization at age 14, and worked at Scientology’s international management headquarters for several years before leaving in 2005. She served as a Scientology executive in multiple high-ranking positions, working out of the international headquarters of Scientology known as “Gold Base”, located in Gilman Hot Springs near Hemet, California.

Retrieved from “https://en.wikinews.org/w/index.php?title=Author_Amy_Scobee_recounts_abuse_as_Scientology_executive&oldid=4579695”

Fans jumping for Juno tickets

Saturday, February 12, 2005

The stage has yet to be set, the lights haven’t even been hung, but Juno fever is already starting to grip Canadians.

The 34th annual Juno Awards honoring Canadian music is scheduled to take place at the MTS Centre in Winnipeg, Manitoba, Canada April 3 and it appears that people want to be a part of the action.

Five hundred advance ticket packs that went on sale Friday at 10 a.m. (Canadian central time) sold out almost instantly. Tickets for the event will officially go on sale Saturday February 12, also at 10 a.m. Those tickets are expected to cost anywhere from CA$40 to CA$116, depending upon seating.

Tickets for the show have sold out quickly in previous years. The music awards show has gained popularity ever since private broadcaster CTV began broadcasting it live in 2001. Last year the broadcast attracted 1.51 million viewers, making it the most-watched show of the evening.

This year Brent Butt will host the show with K-os, Billy Talent, k.d. lang, Neil Young, and The Tragically Hip already confirmed to perform. Earlier this week when nominations were announced Avril Lavigne led the pack with five nods. The rebel pop star was followed closely by Diana Krall who received four nominations for her album The Girl In The Other Room.

Retrieved from “https://en.wikinews.org/w/index.php?title=Fans_jumping_for_Juno_tickets&oldid=435244”

Preventing Needlestick Injuries

More than 8 million health care workers in the United States work in hospitals and other health care settings. Precise national data are not available on the annual number of needlestick and other percutaneous injuries among health care workers; however, estimates indicate that 600,000 to 800,000 such injuries occur annually. About half of these injuries go unreported.

Data from the EPINet system suggest that at an average hospital, workers incur approximately 30 needlestick injuries per 100 beds per year. Most reported needlestick injuries involve nursing staff; but laboratory staff, physicians, housekeepers, and other health care workers are also injured. Some of these injuries expose workers to bloodborne pathogens that can cause infection.

The most important of these pathogens are HBV, HCV, and HIV. Infections with each of these pathogens are potentially life threatening and preventable.

HIV

Between 1985 and June 1999, cumulative totals of 55 documented cases and 136 possible cases of occupational HIV transmission to U.S. health care workers were reported to the Centers for Disease Control and Prevention (CDC). Most involved nurses and laboratory technicians. Percutaneous injury (e.g., needlestick) was associated with 49 (89%) of the documented transmissions. Of these, 44 involved hollow-bore needles, most of which were used for blood collection or insertion of an IV catheter.

HIV infection is a complex disease that can be associated with many symptoms. The virus attacks part of the bodys immune system, eventually leading to severe infections and other complications, a condition known as AIDS.

Health care workers who were investigated and (1) had no identifiable behavioral or transfusion risks, (2) reported having had percutaneous or mucocutaneous occupational exposures to blood or body fluids or to laboratory solutions containing HIV, but (3) had no documented HIV seroconversion resulting from a specific occupational exposure.

HBV

Information from national hepatitis surveillance is used to estimate the number of HBV infections in health care workers. In 1995, an estimated 800 health care workers became infected with HBV [CDC unpublished data]. This figure represented a 95% decline from the 17,000 new infections estimated in 1983. The decline was largely due to the widespread immunization of health care workers with the hepatitisB vaccine and the use of universal precautions and other measures required by the Occupational Safety and Health Administration (OSHA) bloodborne pathogens standard. About one-third to one-half of persons with acute HBV infection develop symptoms of hepatitis such as jaundice, fever, nausea, and abdominal pain. Most acute infections resolve, but 5% to 10% of patients develop chronic infection with HBV that carries an estimated 20% lifetime risk of dying from cirrhosis and 6% risk of dying from liver cancer.

HCV

Hepatitis C virus infection is the most common chronic bloodborne infection in the United States, affecting approximately 4 million people. Although the prevalence of HCV infection among health care workers is similar to that in the general population (1% to 2%), health care workers clearly have an increased occupational risk for HCV infection.

In a study that evaluated risk factors for infection, a history of unintentional needlestick injury was independently associated with HCV infection. The number of health care workers who have acquired HCV occupationally is not known. However, of the total acute HCV infections that have occurred annually (ranging from 100,000 in 1991 to 36,000 in 1996), 2% to 4% have been in health care workers exposed to blood in the workplace.

HCV infection often occurs with no symptoms or only mild symptoms. But unlike HBV, chronic infection develops in 75% to 85% of patients, with active liver disease developing in 70%. Of the patients with active liver disease, 10% to 20% develop cirrhosis, and 1% to 5% develop liver cancer.

RISK OF INFECTION AFTER A NEEDLESTICK INJURY

After a needlestick exposure to an infected patient, a health care workers risk of infection depends on the pathogen involved, the immune status of the worker, the severity of the needlestick injury, and the availability and use of appropriate post exposure prophylaxis.

HIV

To estimate the rate of HIV transmission, data were combined from more than 20 worldwide prospective studies of health care workers exposed to HIV-infected blood through a percutaneous injury. In all, 21 infections followed 6,498 exposures for an average transmission rate of 0.3% per injury. A retrospective case-control study of health care workers who had percutaneous exposures to HIV found that the risk of HIV transmission was increased when the worker was exposed to a larger quantity of blood from the patient, as indicated by (1) a visibly bloody device, (2) a procedure that involved placing a needle in a patients vein or artery, or (3) a deep injury. Preliminary data suggest that such high-risk needlestick injuries may have a substantially greater risk of disease transmission per injury.

Post-exposure prophylaxis for HIV is recommended for health care workers occupationally exposed to HIV under certain circumstances. Limited data suggest that such prophylaxis may considerably reduce the chance of becoming infected with HIV. However, the drugs used for HIV post exposure prophylaxis have many adverse side effects. Currently no vaccine exists to prevent HIV infection, and no treatment exists to cure it.

HBV

The rate of HBV transmission to susceptible health care workers ranges from 6% to 30% after a single needlestick exposure to an HBV-infected patient. However, such exposures are a risk only for health care workers who are not immune to HBV. Health care workers who have antibodies to HBV either from preexposure vaccination or prior infection are not at risk. In addition, if a susceptible worker is exposed to HBV, post-exposure prophylaxis with hepatitis B immune globulin and initiation of hepatitis B vaccine is more than 90% effective in preventing HBV infection.

HCV

Prospective studies of health care workers exposed to HCV through a needlestick or other percutaneous injury have found that the incidence of anti-HCV seroconversion (indicating infection) averages 1.8% (range, 0% to 7%) per injury. Currently no vaccine exists to prevent HCV infection, and neither immunoglobulin nor antiviral therapy is recommended as post-exposure prophylaxis. However, recommendations for treatment of early infections are rapidly evolving. Health care workers with known exposure should be monitored for seroconversion and referred for medical follow up if seroconversion occurs.

Summary

Although exposure to HBV poses a high risk for infection, administration of preexposure vaccination or post-exposure prophylaxis to workers can dramatically reduce this risk. Such is not the case with HCV and HIV. Preventing the needlestick injury is the best approach to preventing these diseases in health care workers, and it is an important part of any bloodborne pathogen prevention program in the workplace.

HOW DO NEEDLESTICK INJURIES OCCUR?

Devices Associated with Needlestick Injuries

Of nearly 5,000 percutaneous injuries reported by hospitals between June 1995 and July 1999, 62% were associated with hollow-bore needles, primarily hypodermic needles attached to disposable syringes (29%) and winged-steel (butterfly-type) needles (13%). Data from hospitals participating in EPINet show a similar distribution of injuries by device type.

Activities Associated with Needlestick Injuries

Whenever a needle or other sharp device is exposed, injuries can occur. Approximately 38% of percutaneous injuries occur during use and 42% occur after use and before disposal. The circumstances leading to a needlestick injury depend partly on the type and design of the device used. For example, needle devices that must be taken apart or manipulated after use (e.g., prefilled cartridge syringes and phlebotomy needle/ vacuum tube assemblies) are an obvious hazard and have been associated with increased injury rates. In addition, needles attached to a length of flexible tubing (e.g., winged-steel needles and needles attached to IV tubing) are sometimes difficult to place in sharps containers and thus present another injury hazard. Injuries involving needles attached to IV tubing may occur when a health care worker inserts or withdraws a needle from an IV port or tries to temporarily remove the needlestick hazard by inserting the needle into a drip chamber, IV port or bag, or even bedding.

In addition to risks related to device characteristics, needlestick injuries have been related to certain work practices such as:

recapping,

transferring a body fluid between containers, and

failing to properly dispose of used needles in puncture-resistant sharps containers.

Past studies of needlestick injuries have shown that 10% to 25% occurred when recapping a used needle. Although recapping by hand has been discouraged for some time and is prohibited under the OSHA bloodborne pathogens standard unless no alternative exists, 5% of needlestick injuries in NaSH hospitals are still related to this practice. Injury may occur when a health care worker attempts to transfer blood or other body fluids from a syringe to a specimen container (such as a vacuum tube) and misses the target. Also, if used needles or other sharps are left in the work area or are discarded in a sharps container that is not puncture resistant, a needlestick injury may result.

OSHA, FDA, AND STATE REGULATIONS

OSHA

The current Federal standard for addressing needlestick injuries among health care workers is the OSHA bloodborne pathogens standard, which has been in effect since 1992. The standard applies to all occupational exposures to blood or other potentially infectious materials. Notable elements of this standard require the following:

A written exposure control plan designed to eliminate or minimize worker

exposure to bloodborne pathogens

Compliance with universal precautions (an infection control principle

that treats all human blood and other potentially infectious materials as infectious)

Engineering controls and work practices to eliminate or minimize worker exposure

Personal protective equipment (if engineering controls and work practices do not eliminate occupational exposures)

Prohibition of bending, recapping, or removing contaminated needles and other sharps unless such an act is required by a specific procedure or has no feasible alternative

Prohibition of shearing or breaking contaminated needles (OSHA defines contaminated as the presence or the reasonably anticipated presence of blood or other potentially infectious materials on an item or surface)

Free hepatitis B vaccinations offered to workers with occupational exposure to bloodborne pathogens.

Worker training in appropriate engineering controls and work practices

Post-exposure evaluation and follow up, including post-exposure prophylaxis when appropriate

OSHA also intends to act to reduce the number of injuries that health care workers receive from needles and other sharp medical objects. First, the agency has revised the compliance directive accompanying its 1992 bloodborne pathogens standard to reflect newer and safer technologies now available and to increase the employers responsibility to evaluate and use effective, safer technologies. Second, the agency has proposed a requirement in the revised recordkeeping rule that all injuries resulting from contaminated needles and sharps be recorded on OSHA logs used by employers to record injuries and illnesses. Finally, OSHA will take steps to amend its bloodborne pathogens standard by placing needlestick and sharps injuries on its regulatory agenda.

FDA

Under the regulations of the Food and Drug Administration (FDA) application clearance process, the manufacturers of medical devices (including needles used in patient care) must meet requirements for appropriate registration and for listing, labeling, and good manufacturing practices for design and production. The process for receiving clearance or approval to market a device requires device manufacturers to (1) demonstrate that a new device is substantially equivalent to a legally marketed device or (2) document the safety and effectiveness of the new device for patient care through a more involved premarket approval process. FDA has also released two advisories pertaining to sharps and the risk of bloodborne pathogen transmission in the health care setting.

State Regulations

Currently, multiple states have adopted and more are considering legislation to require additional regulatory actions addressing bloodborne pathogen exposures to health care workers. The California standard has several requirements that go beyond those currently required by OSHA. These requirements include stronger language for the use of needleless systems for certain procedures or (where needleless systems are not available) the use of needles with engineered sharps injury protection for certain procedures.

USE OF IMPROVED ENGINEERING CONTROLS IN A PREVENTION STRATEGY

Comprehensive Programs to Prevent Needlestick Injuries

Safety and health issues can best be addressed in the setting of a comprehensive prevention program that considers all aspects of the work environment and that has employee involvement as well as management commitment. Implementing the use of improved engineering controls is one component of such a comprehensive program. Since many devices with needlestick prevention features are new, this section primarily addresses their use, including desirable characteristics, examples, and data supporting their effectiveness.

Desirable Characteristics of Devices with Safety Features

Improved engineering controls are often among the most effective approaches to reducing occupational hazards and therefore are an important element of a needlestick prevention program. Such controls include eliminating the unnecessary use of needles and implementing devices with safety features. These characteristics include the following:

The device is needleless.

The safety feature is an integral part of the device.

The device preferably works passively (i.e., it requires no activation by the user). If user

activation is necessary, the safety feature can be engaged with a single-handed technique and allows the workers hands to remain behind the exposed sharp.

The user can easily tell whether the safety feature is activated.

The safety feature cannot be deactivated and remains protective through disposal.

The device performs reliably.

The device is easy to use and practical.

The device is safe and effective for patient care.

Although each of these characteristics is desirable, some are not feasible, applicable or available for certain health care situations. For example, needles will always be necessary where alternatives for skin penetration are not available. Also, a safety feature that requires activation by the user might be preferable to one that is passive in some cases. Each device must be considered on its own merit and ultimately on its ability to reduce workplace injuries. The desirable characteristics listed here should thus serve only as a guideline for device design and selection.

Contaminated Sharps Discarding and Containment.

Contaminated sharps shall be discarded immediately or as soon as feasible in containers that are:

Closable;

Puncture resistant;

Leak-proof on sides and bottom; and

Labeled or color-coded.

During use, containers for contaminated sharps shall be:

Easily accessible to personnel and located as close as is feasible to the immediate area where sharps are used or can be reasonably anticipated to be found (e.g., laundries);

Maintained upright throughout use; and

Replaced routinely and not be allowed to overfill.

When moving containers of contaminated sharps from the area of use, the containers shall be:

Closed immediately prior to removal or replacement to prevent spillage or protrusion of contents during handling, storage, transport, or shipping;

Placed in a secondary container if leakage is possible. The second container shall be:

Closable;

Constructed to contain all contents and prevent leakage during handling, storage, transport, or shipping; and

Labeled or color-coded.

Reusable containers shall not be opened, emptied, or cleaned manually or in any other manner which would expose employees to the risk of percutaneous injury.

Laundry.

Contaminated laundry shall be handled as little as possible with a minimum of agitation.

Contaminated laundry shall be bagged or containerized at the location where it was used and shall not be sorted or rinsed in the location of use.

Contaminated laundry shall be placed and transported in bags or containers labeled or color-coded. When a facility utilizes Universal Precautions in the handling of all soiled laundry, alternative labeling or color-coding is sufficient if it permits all employees to recognize the containers as requiring compliance with Universal Precautions.

Whenever contaminated laundry is wet and presents a reasonable likelihood of soak-through of or leakage from the bag or container, the laundry shall be placed and transported in bags or containers which prevent soak-through and/or leakage of fluids to the exterior.

The employer shall ensure that employees who have contact with contaminated laundry wear protective gloves and other appropriate personal protective equipment.

When a facility ships contaminated laundry off-site to a second facility which does not utilize Universal Precautions in the handling of all laundry, the facility generating the contaminated laundry must place such laundry in bags or containers which are labeled or color-coded.

Communication of Hazards to Employees —

Labels and Signs —

Warning labels shall be affixed to containers of regulated waste, refrigerators and freezers containing blood or other potentially infectious material; and other containers used to store, transport or ship blood or other potentially infectious materials.

These labels shall be fluorescent orange or orange-red or predominantly so, with lettering and symbols in a contrasting color.

Labels shall be affixed as close as feasible to the container by string, wire, adhesive, or other method that prevents their loss or unintentional removal.

Red bags or red containers may be substituted for labels.

Individual containers of blood or other potentially infectious materials that are placed in a labeled container during storage, transport, shipment or disposal are exempted from the labeling requirement.

Labels required for contaminated equipment shall be in accordance with this paragraph and shall also state which portions of the equipment remain contaminated.

Regulated waste that has been decontaminated need not be labeled or color-coded.

CONCLUSIONS

Needlestick injuries are an important and continuing cause of exposure to serious and fatal diseases among health care workers. Greater collaborative efforts by all stakeholders are needed to prevent needlestick injuries and the tragic consequences that can result. Such efforts are best accomplished through a comprehensive program that addresses institutional, behavioral, and device-related factors that contribute to the occurrence of needlestick injuries in health care workers. Critical to this effort are the elimination of needle bearing devices where safe and effective alternatives are available and the development, evaluation, and use of needle devices with safety features.

Ontario Votes 2007: Interview with NDP candidate Glenn Crowe, Bramalea-Gore-Malton

Thursday, October 4, 2007

Glenn Crowe is running for the NDP in the Ontario provincial election, in the Bramalea-Gore-Malton riding. Wikinews’ Nick Moreau interviewed him regarding his values, his experience, and his campaign.

Crowe did not reply to various questions asked.

Stay tuned for further interviews; every candidate from every party is eligible, and will be contacted. Expect interviews from Liberals, Progressive Conservatives, New Democratic Party members, Ontario Greens, as well as members from the Family Coalition, Freedom, Communist, Libertarian, and Confederation of Regions parties, as well as independents.

Retrieved from “https://en.wikinews.org/w/index.php?title=Ontario_Votes_2007:_Interview_with_NDP_candidate_Glenn_Crowe,_Bramalea-Gore-Malton&oldid=704112”

Saturn moon Enceladus may have salty ocean

Thursday, June 23, 2011

NASA’s Cassini–Huygens spacecraft has discovered evidence for a large-scale saltwater reservoir beneath the icy crust of Saturn’s moon Enceladus. The data came from the spacecraft’s direct analysis of salt-rich ice grains close to the jets ejected from the moon. The study has been published in this week’s edition of the journal Nature.

Data from Cassini’s cosmic dust analyzer show the grains expelled from fissures, known as tiger stripes, are relatively small and usually low in salt far away from the moon. Closer to the moon’s surface, Cassini found that relatively large grains rich with sodium and potassium dominate the plumes. The salt-rich particles have an “ocean-like” composition and indicate that most, if not all, of the expelled ice and water vapor comes from the evaporation of liquid salt-water. When water freezes, the salt is squeezed out, leaving pure water ice behind.

Cassini’s ultraviolet imaging spectrograph also recently obtained complementary results that support the presence of a subsurface ocean. A team of Cassini researchers led by Candice Hansen of the Planetary Science Institute in Tucson, Arizona, measured gas shooting out of distinct jets originating in the moon’s south polar region at five to eight times the speed of sound, several times faster than previously measured. These observations of distinct jets, from a 2010 flyby, are consistent with results showing a difference in composition of ice grains close to the moon’s surface and those that made it out to the E ring, the outermost ring that gets its material primarily from Enceladean jets. If the plumes emanated from ice, they should have very little salt in them.

“There currently is no plausible way to produce a steady outflow of salt-rich grains from solid ice across all the tiger stripes other than salt water under Enceladus’s icy surface,” said Frank Postberg, a Cassini team scientist at the University of Heidelberg in Germany.

The data suggests a layer of water between the moon’s rocky core and its icy mantle, possibly as deep as about 50 miles (80 kilometers) beneath the surface. As this water washes against the rocks, it dissolves salt compounds and rises through fractures in the overlying ice to form reserves nearer the surface. If the outermost layer cracks open, the decrease in pressure from these reserves to space causes a plume to shoot out. Roughly 400 pounds (200 kilograms) of water vapor is lost every second in the plumes, with smaller amounts being lost as ice grains. The team calculates the water reserves must have large evaporating surfaces, or they would freeze easily and stop the plumes.

“We imagine that between the ice and the ice core there is an ocean of depth and this is somehow connected to the surface reservoir,” added Postberg.

The Cassini mission discovered Enceladus’ water-vapor and ice jets in 2005. In 2009, scientists working with the cosmic dust analyzer examined some sodium salts found in ice grains of Saturn’s E ring but the link to subsurface salt water was not definitive. The new paper analyzes three Enceladus flybys in 2008 and 2009 with the same instrument, focusing on the composition of freshly ejected plume grains. In 2008, Cassini discovered a high “density of volatile gases, water vapor, carbon dioxide and carbon monoxide, as well as organic materials, some 20 times denser than expected” in geysers erupting from the moon. The icy particles hit the detector target at speeds between 15,000 and 39,000 MPH (23,000 and 63,000 KPH), vaporizing instantly. Electrical fields inside the cosmic dust analyzer separated the various constituents of the impact cloud.

“Enceladus has got warmth, water and organic chemicals, some of the essential building blocks needed for life,” said Dennis Matson in 2008, Cassini project scientist at NASA’s Jet Propulsion Laboratory in Pasadena, California.

“This finding is a crucial new piece of evidence showing that environmental conditions favorable to the emergence of life can be sustained on icy bodies orbiting gas giant planets,” said Nicolas Altobelli, the European Space Agency’s project scientist for Cassini.

“If there is water in such an unexpected place, it leaves possibility for the rest of the universe,” said Postberg.

Retrieved from “https://en.wikinews.org/w/index.php?title=Saturn_moon_Enceladus_may_have_salty_ocean&oldid=4453704”

Residents of Leeds, England neighbourhood plagued with crime ask council for help

Sunday, October 10, 2010

Residents of a Leeds, England neighbourhood have requested help from a council because their neighbourhood is plagued by crime, overcrowding, and community tensions.

Leeds City Council received a request for help from residents of Hyde Park, who said they were worried about the increasing level of anti-social behavior and worsening community relations. A report will be unveiled on Wednesday by a council delegation, highlighting the problems in the area. “The people living in Hyde Park come from widely different population groups… these groups have very different customs, needs and living styles and this can provoke high levels of tension in the area,” the delegation said.

The council claims that because of the 28 per cent ethnic minority population and the 40,000 students living in the neighbourhood, there are tensions between residents. They added, however, that they are actively encouraging people to work together, citing a multi-faith forum, a cricket competition and activities which bring old and young together.

The report says that the council are trying to build relationships between Muslims and police, something which they said is “particularly important after the area’s connection to the London bombings on 7th July 2005.” A local newspaper reported that “the Shebab project introduces young Muslims to role models from sport and culture and also runs scholars’ talks to counter extremist ideologies.”

Crime has increased by 7% in the past year in Hyde Park, and residents noted that anti-social behaviour was getting worse. The council said that an anti-burglary task force had helped to reduce the number of thefts from homes. Residents complained that there was a lack of pride in the area, and at the end of the academic year in the summer, large piles of rubbish were left in streets, yards and alleyways. The report adds that the council operates a recycling scheme aimed towards teenagers, and that rubbish collections have increased.

[We are] slightly frustrated with certain communication issues that we’ve had with the council

The Guardian reported on Wednesday that campaigners are attempting to “take control of a derelict school building and transform it into a community hub are appealing for sponsors and partners in a bid to turn their dreams into reality.” They say that the unused building, owned by the council, could be used for meetings and events. A volunteer group of residents have been working on a business plan, and have gained support from local businesses to create “a vision of an open, accessible and valuable resource for all.”

A member of the commitee, however, said he was “frustrated” with the council’s attitude towards the plans. “The RPCC is slightly frustrated with certain communication issues that we’ve had with the council, but we’re working with them and hoping to gain further assistance going forward,” he said. “It’s a shame that certain setbacks could have been avoided.”

The deputation added that “a major factor in Hyde Park’s suffering is its high level of population density”, which they conceded is something they are unable to change. The council responded to complaints that streets are “cheap and unhealthy takeaways, letting agents and boarded-up shop fronts,” by saying that Hyde Park Corner and Headingley are, according to the Yorkshire Post, “thriving shopping areas and work had taken place to ensure a good mix of outlets.”

The report concludes: “The council acknowledges that because of the very particular circumstances which exist in the neighbourhood, Hyde Park faces difficult challenges which affect the quality of life of residents and that ‘normal’ service levels may not be sufficient to tackle some of these. The council will do more to enable local people to influence how services work and how local problems are tackled. Local community and voluntary groups will be invited to play an active role.”

Retrieved from “https://en.wikinews.org/w/index.php?title=Residents_of_Leeds,_England_neighbourhood_plagued_with_crime_ask_council_for_help&oldid=3357971”

5 Tips For Successful Container Gardening With Flowers}

Submitted by: Theresa Goodman

If you follow these 5 tips for successful container gardening you will not only save time, but money, frustration and possibly embarrassment. As this is an increasingly popular venue for gardening, container gardening is making a fashion statement. Container gardens are already very popular for entries, patios and decks. Maybe you’ve thought about incorporating them into your office or home, but haven’t. If by chance you feel a little overwhelmed on the basics, here are 5 tips for successful container gardening, even if it’s your first.

Before you run off in all directions as if you had 2 hours to create a masterpiece, pause to do some planning. First think about what type of feeling you want to have, when you look at your container. For me, I want to feel like I’ve walked into my own “secret garden” and have a sense of calm. I think about how it will smell, and feel among other things. Is it going to be a focal point in a room, or mixed in as part of a theme? Will it be the centerpiece on a table, or placed in a semi-lit hallway?

Tip #1

Anything can be used as a container. If you are purchasing a container from the store, choose ones with drainage holes. However, if you can poke, drill or carve a hole in it then use it. Container gardens have been made from tables, old pots, milk cartons, cans, gloves, boots, pocketbooks, suitcases, pots, pans and mailboxes, just to name a few. You can be creative and recycle items to use as containers. Allow yourself to be creative. Be sure to clean it out, and let it dry thoroughly. If you’ve used any chemicals or any type of varnish, clean and let dry. Look around for anything that can be shaped to hold dirt.

Tip #2

Use containers larger than the root ball of your plant, considering the size of the mature plant. This is really important and sometimes we forget about how big the plant may actually grow or say to ourselves we’ll just transplant it as it grows. Therefore, you want your roots to be able to expand; otherwise the plant is going to eventually die. So read the information card to get a good idea of what size container you will ultimately need.

Tip #3

Use a good potting soil, compost or combination of both. I didn’t realize how many types and combination soils are available. Just because a bag of soil is on sale, doesn’t mean it’s good. Think of your soil as a primary food for your plants food chain. To get the desired results it pays to know what’s in a particular soil and if it what your plant/flower needs. Also, sometimes the soil may be too heavy for what you are planting. Just filling a pot up with dirt and stuffing your starter plant therein, may cause you to waste time and money.

Tip #4

In most containers the weight and scale of a container can become an issue when the pot has to be transported to a new location. The best thing to do is to move your pot to its final location before you plant it. You do have the option of reducing the overall weight of a large container. You can fill it with lightweight potting soil, ceramic beads, Styrofoam, broken pieces of pot, drainage gravel, pine cones, aluminum cans or small plastic nursery pots. I’ve even used an empty plastic milk carton.

Tip #5

Select plants that suit your light conditions. Too much sun for one plant will kill it while do little sun for another plant will do the same. Full sun means your plant will receive a minimum of six hours of sunlight daily.

If you follow these 5 tips, you will experience success in container gardening with flowers. You won’t pull your hair out, or throw darts at a dart board out of frustration, because you can get it right the first time.

About the Author: I enjoy gardening, specifically container gardening,so you can learn from my mistakes. I was a remedial gardener gone pro. That’s my final answer. The site is regularly updated. Be my guest and stop by!

containergarden411.com/blog

Source:

isnare.com

Permanent Link:

isnare.com/?aid=314336&ca=Gardening}

Wikinews interviews 2020 Melbourne Lord Mayor Candidate Wayne Tseng

This article mentions the Wikimedia Foundation, one of its projects, or people related to it. Wikinews is a project of the Wikimedia Foundation.

Thursday, October 22, 2020

2020 Melbourne Lord Mayor candidate Wayne Tseng answered some questions about his campaign for the upcoming election from Wikinews. The Lord Mayor election in the Australian city is scheduled to take place this week.

Tseng runs a firm called eTranslate, which helps software developers to make the software available to the users. In the candidate’s questionnaire, Tseng said eTranslate had led to him working with all three tiers of the government. He previously belonged to the Australian Liberal Party, but has left since then, to run for mayorship as an independent candidate.

Tseng is of Chinese descent, having moved to Australia with his parents from Vietnam. Graduated in Brisbane, Tseng received his PhD in Melbourne and has been living in the city, he told Wikinews. Tseng also formed Chinese Precinct Chamber of Commerce, an organisation responsible for many “community bond building initiatives”, the Lord Mayor candidate told Wikinews.

Tseng discussed his plans for leading Melbourne, recovering from COVID-19, and “Democracy 2.0” to ensure concerns of minorities in the city were also heard. Tseng also focused on the importance of the multi-culture aspect and talked about making Melbourne the capital of the aboriginals. Tseng also explained why he thinks Melbourne is poised to be a world city by 2030.

Tseng’s deputy Lord Mayor candidate Gricol Yang is a Commercial Banker and works for ANZ Banking Group.

Currently, Sally Capp is the Lord Mayor of Melbourne, the Victorian capital. Capp was elected as an interim Lord Mayor in mid-2018 after the former Lord Mayor Robert Doyle resigned from his position after sexual assault allegations. Doyle served as the Lord Mayor of Melbourne for almost a decade since 2008.

Retrieved from “https://en.wikinews.org/w/index.php?title=Wikinews_interviews_2020_Melbourne_Lord_Mayor_Candidate_Wayne_Tseng&oldid=4598699”

Israel Journal: Is Yossi Vardi a good father to his entrepreneurial children?

Thursday, December 20, 2007

Wikinews reporter David Shankbone is currently, courtesy of the Israeli government and friends, visiting Israel. This is a first-hand account of his experiences and may — as a result — not fully comply with Wikinews’ neutrality policy. Please note this is a journalism experiment for Wikinews and put constructive criticism on the collaboration page.

This article mentions the Wikimedia Foundation, one of its projects, or people related to it. Wikinews is a project of the Wikimedia Foundation.

Dr. Yossi Vardi is known as Israel’s ‘Father of the Entrepreneur’, and he has many children in the form of technology companies he has helped to incubate in Tel Aviv‘s booming Internet sector. At the offices of Superna, one such company, he introduced a whirlwind of presentations from his baby incubators to a group of journalists. What stuck most in my head was when Vardi said, “What is important is not the technology, but the talent.” Perhaps because he repeated this after each young Internet entrepreneur showed us his or her latest creation under Vardi’s tutelage. I had a sense of déjà vu from this mantra. A casual reader of the newspapers during the Dot.com boom will remember a glut of stories that could be called “The Rise of the Failure”; people whose technology companies had collapsed were suddenly hot commodities to start up new companies. This seemingly paradoxical thinking was talked about as new back then; but even Thomas Edison—the Father of Invention—is oft-quoted for saying, “I have not failed. I have just found ten thousand ways that won’t work.”

Vardi’s focus on encouraging his brood of talent regardless of the practicalities stuck out to me because of a recent pair of “dueling studies” The New York Times has printed. These are the sort of studies that confuse parents on how to raise their kids. The first, by Carol Dweck at Stanford University, came to the conclusion that children who are not praised for their efforts, regardless of the outcome’s success, rarely attempt more challenging and complex pursuits. According to Dweck’s study, when a child knows that they will receive praise for being right instead of for tackling difficult problems, even if they fail, they will simply elect to take on easy tasks in which they are assured of finding the solution.

Only one month earlier the Times produced another story for parents to agonize over, this time based on a study from the Brookings Institution, entitled “Are Kids Getting Too Much Praise?” Unlike Dweck’s clinical study, Brookings drew conclusions from statistical data that could be influenced by a variety of factors (since there was no clinical control). The study found American kids are far more confident that they have done well than their Korean counterparts, even when the inverse is true. The Times adds in the words of a Harvard faculty psychologist who intoned, “Self-esteem is based on real accomplishments. It’s all about letting kids shine in a realistic way.” But this is not the first time the self-esteem generation’s proponents have been criticized.

Vardi clearly would find himself encouraged by Dweck’s study, though, based upon how often he seemed to ask us to keep our eyes on the people more than the products. That’s not to say he has not found his latest ICQ, though only time—and consumers—will tell.

For a Web 2.User like myself, I was most fascinated by Fixya, a site that, like Wikipedia, exists on the free work of people with knowledge. Fixya is a tech support site where people who are having problems with equipment ask a question and it is answered by registered “experts.” These experts are the equivalent of Wikipedia’s editors: they are self-ordained purveyors of solutions. But instead of solving a mystery of knowledge a reader has in their head, these experts solve a problem related to something you have bought and do not understand. From baby cribs to cellular phones, over 500,000 products are “supported” on Fixya’s website. The Fixya business model relies upon the good will of its experts to want to help other people through the ever-expanding world of consumer appliances. But it is different from Wikipedia in two important ways. First, Fixya is for-profit. The altruistic exchange of information is somewhat dampened by the knowledge that somebody, somewhere, is profiting from whatever you give. Second, with Wikipedia it is very easy for a person to type in a few sentences about a subject on an article about the Toshiba Satellite laptop, but to answer technical problems a person is experiencing seems like a different realm. But is it? “It’s a beautiful thing. People really want to help other people,” said the presenter, who marveled at the community that has already developed on Fixya. “Another difference from Wikipedia is that we have a premium content version of the site.” Their premium site is where they envision making their money. Customers with a problem will assign a dollar amount based upon how badly they need an answer to a question, and the expert-editors of Fixya will share in the payment for the resolved issue. Like Wikipedia, reputation is paramount to Fixya’s experts. Whereas Wikipedia editors are judged by how they are perceived in the Wiki community, the amount of barnstars they receive and by the value of their contributions, Fixya’s customers rate its experts based upon the usefulness of their advice. The site is currently working on offering extended warranties with some manufacturers, although it was not clear how that would work on a site that functioned on the work of any expert.

Another collaborative effort product presented to us was YouFig, which is software designed to allow a group of people to collaborate on work product. This is not a new idea, although may web-based products have generally fallen flat. The idea is that people who are working on a multi-media project can combine efforts to create a final product. They envision their initial market to be academia, but one could see the product stretching to fields such as law, where large litigation projects with high-level of collaboration on both document creation and media presentation; in business, where software aimed at product development has generally not lived up to its promises; and in the science and engineering fields, where multi-media collaboration is quickly becoming not only the norm, but a necessity.

For the popular consumer market, Superna, whose offices hosted our meeting, demonstrated their cost-saving vision for the Smart Home (SH). Current SH systems require a large, expensive server in order to coordinate all the electronic appliances in today’s air-conditioned, lit and entertainment-saturated house. Such coordinating servers can cost upwards of US$5,000, whereas Superna’s software can turn a US$1,000 hand-held tablet PC into household remote control.

There were a few start-ups where Vardi’s fatherly mentoring seemed more at play than long-term practical business modeling. In the hot market of WiFi products, WeFi is software that will allow groups of users, such as friends, share knowledge about the location of free Internet WiFi access, and also provide codes and keys for certain hot spots, with access provided only to the trusted users within a group. The mock-up that was shown to us had a Google Maps-esque city block that had green points to the known hot spots that are available either for free (such as those owned by good Samaritans who do not secure their WiFi access) or for pay, with access information provided for that location. I saw two long-term problems: first, WiMAX, which is able to provide Internet access to people for miles within its range. There is already discussion all over the Internet as to whether this technology will eventually make WiFi obsolete, negating the need to find “hot spots” for a group of friends. Taiwan is already testing an island-wide WiMAX project. The second problem is if good Samaritans are more easily located, instead of just happened-upon, how many will keep their WiFi access free? It has already become more difficult to find people willing to contribute to free Internet. Even in Tel Aviv, and elsewhere, I have come across several secure wireless users who named their network “Fuck Off” in an in-your-face message to freeloaders.

Another child of Vardi’s that the Brookings Institution might say was over-praised for self-esteem but lacking real accomplishment is AtlasCT, although reportedly Nokia offered to pay US$8.1 million for the software, which they turned down. It is again a map-based software that allows user-generated photographs to be uploaded to personalized street maps that they can share with friends, students, colleagues or whomever else wants to view a person’s slideshow from their vacation to Paris (“Dude, go to the icon over Boulevard Montmartre and you’ll see this girl I thought was hot outside the Hard Rock Cafe!”) Aside from the idea that many people probably have little interest in looking at the photo journey of someone they know (“You can see how I traced the steps of Jesus in the Galilee“), it is also easy to imagine Google coming out with its own freeware that would instantly trump this program. Although one can see an e-classroom in architecture employing such software to allow students to take a walking tour through Rome, its desirability may be limited.

Whether Vardi is a smart parent for his encouragement, or in fact propping up laggards, is something only time will tell him as he attempts to bring these products of his children to market. The look of awe that came across each company’s representative whenever he entered the room provided the answer to the question of Who’s your daddy?

Retrieved from “https://en.wikinews.org/w/index.php?title=Israel_Journal:_Is_Yossi_Vardi_a_good_father_to_his_entrepreneurial_children%3F&oldid=1979332”